Even though it is usually quite relaxing, gardening can also be challenging at times, which is why you should take it slow if you want to start learning about it and care for your own plants.
There are plants that require you to water them every day or to repot and change the soil on a regular basis, which can sometimes be quite complicated.
However, the snake plant is one of the best plants for beginners because it will not take a lot of your time to take care of it.
Therefore, today I am going to teach you everything I know about Snake plants, from how to grow them, to discussing some core problems they can have and solutions to those problems.
How to Grow Snake Plant
In order for you to be a successful gardener, you need to know something about growing plants you wanted to have in your home.
Some plants are easier to grow than others. Some require special conditions and some can grow even without much attention.
Snake plant is one of the easiest plants to grow since you won’t have to spend too much time caring for it. You can even leave it for several days without having to water it.
Now, the first thing I want to talk about is how to grow a snake plant, in order for you to get a notion about what you are going to need to successfully plant and care for a snake plant.
1. Picking the right type of soil
Before planting a snake plant, you need to select a proper soil for it, in order to successfully grow a healthy plant.
The most important thing to remember here is that you will need free-draining soil because snake plants don’t like being too moisty.
In case you decide to use a common soil, then you should consider mixing it with a bit of sand, which should increase the drainage.
2. Finding the proper pot for your snake plant
After you decided on the soil type, you need a pot to plant your snake plant. When selecting a pot, you should consider those who are a bit wider, since the roots like to be free from the edges, and you don’t need to get a too deep pot.
However, make sure not to get a pot that is too large because it means that soil will take a longer time to dry, which could damage the roots by causing them to rot.
3. Putting your snake plant at the appropriate spot
The good thing about snake plants is that they don’t require direct sunlight, so you can simply put them inside your house in some bright areas.
However, they can grow quite successfully outside as well, so if you want to beautify your yard, don’t hesitate to put a couple of them outside.
Also, you can use artificial light to keep your snake plant happy and strong. If your intention is to put it in your office, where the most common type of light is a fluorescent light, then you should know that it might work, but the snake plant might also need a bit brighter light to survive, depending on the light intensity.
How to Take Care of Snake Plant
Planting is just one part of how to grow a Snake plant process. In order for it to fully grow and be healthy, you will need to learn how to take care of it.
Even though Snake plants are not hard to manage, there are still a couple of important things you should think about when caring for a Snake plant.
All these activities should make your Snake plant healthy and ensure a pretty good Snake plant growth rate.
So, without any further due, let’s begin!
1. Keeping the right temperature
All types of plants have a need for a different type of environment. Some plants like when it is moisty and cold, while some like when it is dry and warm.
That means that some plants must be put inside, while some can live in the harsher conditions and colder weather as well.
When it comes to temperature, the snake plant is pretty easy to maintain since it can survive in different conditions.
So, you can place it inside, or outside, depending on the season, without having to worry about it not surviving.
However, the only thing you need to remember is that the snake plant hates frost, so make sure to put it inside your home during the winter, especially if the weather is very cold.
2. Using the clean water to water the plant
Almost all plants require water to live. Some can survive without it for weeks, while some require you to water them almost every day.
But, what they all have in common is that they all like fresh and clean water, while some also tolerate chlorinated water.
For most plants, you can simply use water from your tap and think about whether it contains salts and minerals that can appear in the soil from time to time, and which could damage your plant.
I will talk more about this topic later, so for now, just remember that clean tap water will definitely work for a Snake plant.
3. Keep the soil moist enough
Another thing to consider when it comes to watering any plant is also the level of moisture in the soil because of some plants like really wet soil, while some prefer moderate moisture levels.
If the water is too moisty, and the plant is not fond of that, it might die soon, so you will have to be careful when watering your plants.
Do some research before you start caring for the plant since that way you will know exactly what your plant needs.
As for the snake plant specifically, watering is not too big of a hassle since this plant can survive multiple weeks without water.
Therefore, make sure that the soil is not too moisty when watering because the snake plant likes moderately moist soil.
4. Using fertilizer
Fertilizers are really useful when it comes to giving useful nutritious elements to your plants, but depending on the plant, you might not have to use them at all.
When it comes to fertilizing a Snake plant, in order to have an optimal growth effect, you should fertilize it once a month.
However, you don’t have to do that throughout the whole year, but only during summer and spring since Snake plant doesn’t need additional healthy food during winter and fall because of the cold weather.
As for what type of fertilizer to use, it would be best to use some of the high-quality house plant food products, preferably without harmful nitrates.
5. Repot Snake plant if needed
When it comes to the snake plant repotting, it is a good thing that you won’t need to do it as often as you might think so.
Snake plants are quite durable and they prefer to be root-bounded, so there are only a couple of situations when you should really repot them, such as when they become too big for the pot they are currently in.
What you should do is not buy the biggest pot you can find, but get the one that is just a bit larger than the previous one because repotting it to the much larger pot will not be good for the plant’s growth.
There are a lot of types of different pots, but in order to find the best indoor plant pot for your Snake plant, you should learn what your plant needs.
View this post on Instagram
Kolmiokäenkaali heräilee kevääseen 🍀💜 #instablogitsisustus #inspiroivakoti #inspisbloggaajat #sisustusinspiraatio #sisustus #miniryijy #seinävaate #ryijy #käsintehty #anopinkieli #kolmiokäenkaali #onnenkäenkaali #oxalistriangularis #snakeplant #skandinaavinensisustus #skandinaavinenkoti #modernijaskandinaavinensisustus #secondhandstylefinland #secondhand #torilöytö #torifi #meilläkotona #vaaleakoti #softminimalism
6. Check if roots are healthy
One of the most important factors that help with plant growth is, of course, strong and healthy root because if the root is not healthy, the plant won’t be able to grow strong and look as good as it should.
Why is root so important? Well, it holds some of the most important minerals and water that keep your plant healthy.
Now, in order to check if roots are healthy or not, you need to know how healthy root even looks, but don’t worry, I’ll help you with that.
It’s quite easy to recognize healthy roots. They are usually white, succulent, and are long enough to fit the pot you picked, as well as capable to hold the soil in the pot without any issues.
One of the main indicators that root is not as healthy as it should be is if it is brown and easily crumbled. Also, if the root is kind of too small, then you shouldn’t buy it because it means that the plant is not mature enough to be transplanted.
However, if you notice that roots are in a somewhat encircled shape, it means that that your plant is root-bound. If that is the case, you can get the plant and repot it, without having to worry too much, but it might take a bit longer time for it to grow and adjust.
7. Propagate your Snake plant
Propagating varies from plant to plant. Different methods work with different plants, so before doing it, you should take a look at which of those methods are good for the type of plant you want to propagate.
When it comes to propagating a Snake plant, you won’t have many troubles, since it supports multiple methods.
Even though over-watering can damage your plant, rooting a Snake plant in water is one of the most efficient methods of propagating this plant.
Apart from that, you can also root it from cuttings, but the best way to grow your Snake plant is to use propagating from the divisions method.
I’ll explain all of these methods in detail later in the text.
8. Remove dead leaves
One of the best ways to keep your plant healthy is to regularly remove any dead and rotten parts you notice.
They can have quite a negative effect on the further growth of your plant, so you should always check if there are damaged or rotten parts on your plant.
It’s not just the case for a Snake plant, but also for every other plant, which is why I am talking about it in general.
Dead and rotten leaves are easily recognizable, they are usually brown and crunchy, as opposed to health leaves, which are green and softer.
If you don’t remove these leaves, they can affect other parts of the plant as well. Just like what happens if you get sepsis and antibiotics don’t work when the amputation is the only way to save someone’s life.
9. Use natural ways to deal with pests
Even though there are a lot of different products that could help your plants grow faster and become healthier, you should try to avoid using some of them.
There are a lot of purely chemical products that could hurt your plants in the long run, even though they might seem useful at first.
Therefore, you should only use natural products, certified by institutions for quality check. That way, you will be sure that your plant is getting the best possible treatment.
Watering Snake Plant
Now that you know some general stuff about how to grow a snake plant indoors, let’s add some more details to the whole process.
First of all, let’s start by talking about snake plant watering in detail, which shouldn’t really be such a big problem, especially because the snake plant isn’t as demanding as other plants when it comes to the watering.
What Type of Water to Use
When it comes to choosing the water for your snake plant, most indoor plants are perfectly fine with normal tap water.
So, caring for a snake plant indoors is quite easy because you don’t have to use some special water, such as chlorinated water and similar.
The only thing you should keep in mind is the temperature of the water. It would be best to use water that is neither too cold nor too warm, in other words, room temperature is the key!
How Often to Water Snake Plant
As for the question of how often to water snake plant, you’ll need to learn more about it before you start watering it.
All plants are somewhat different in that regard, and so is the snake plant. They are quite easy to tend to because they can survive without water for weeks, sometimes even a month, depending on the season.
During warmer days, soil usually dries out faster, so you will need to water your snake plant every week or two, especially if you have indoor snake plant, which is still not much
However, during winter, the soil stays moist for a longer period of time, and in those conditions, you can water them once per month, and sometimes even once per two months.
How to Know When to Water a Snake Plant
Knowing how often to water is important, but knowing when to water snake plant is also crucial because you don’t want to overwater your plant since it could potentially hurt it.
The best time to water your snake plant is when the first 2” from the top part of the soil are completely dry.
You can easily know when the right time is if you use some sort of soil moisture meter, which can be quite a useful tool.
View this post on Instagram
You all know I love me some energy work. Well it should come as no surprise that as I learn more about Real Estate I'm beginning to think about the energy in our home and how it affects us. Our home can be more than a place we take shelter. It can be a place of healing and regeneration. One of the ways I love keeping good energy in a home is with plants! I've already been sharing all about my obsession with succulents lately. Here's another one of my favorite plants: Sansevieria, better known as snake plants or Mother-in-law's tongue. This plant has strong protective energies. The sharp edges are good for cutting through negative or stagnant energy and great for shielding you against negative energy. It can also be an expression of upward growth in your life. Snake plants absorb toxins through the leaves and purifies air to produce pure oxygen. Do you have this plant in your home? I have one in my dining room. Let me know in the comments below where you keep your Mother-in-law's tongue 👅🤣
What Are the Best Ways to Water Your Snake Plant
In order not to overwater your snake plant, you also need to think about what would be the best way to water it.
You should water the soil until the area surrounding the plant is completely soaked, and only stop once you notice that water is coming out of drainage holes on your pot.
There is another way of doing this, which is to completely fill the pot saucer with water and it will automatically be soaked through the drainage holes.
Do this until the water is no longer soaked into, then just dump extra water, so it wouldn’t cause overwatering.
Apart from that, you can use some of the best self-watering pots, which are quite handy, especially if you don’t have time or if you are a forgetful person.
Proper Lighting for a Snake Plant
You probably already know that snake plant is considered to be one of those plants that are almost impossible to kill.
Well, it is true, and the same thing applies to how much light you give it and whether it likes it or not.
The fact is that snake plant, much like a spider plant, likes when it gets nice and indirect sunlight.
If you put it in a nice and shady spot, it will be the happiest plant in the world.
But, if you happen to live in an apartment that doesn’t get that much light and for that reason you are avoiding to have any pet plants in your apartment, I must assure you that snake plant doesn’t mind a bit of darker places.
Another fact is that it doesn’t like direct light at all!
And there is a common idea that all plants must bathe in direct sunlight all year round if you want them to grow well.
Most of the plants, including snake plant can easily burn on direct sunlight, so it is always the best option to choose a nice and shady spot with filtered or indirect light.
Fertilizing Snake Plant
I could say that the snake plant is quite thankful when it comes to fertilizing since there isn’t a need to perform it all the time throughout the year.
The best time to fertilize your snake plant is during the warmer days, such as during the spring and summer because, during that period, snake plants need to get extra healthy food.
As for the type of fertilizer, you should use classic plant food for all purposes, since it gives the most important nutrients to your plant.
Also, you can completely avoid fertilizing during the cold weather, in winter and fall, since during that time, the snake plant stays dormant and doesn’t need additional food to grow.
View this post on Instagram
Hi und ein herzliches Willkommen an alle die neu hier bei mir sind 💚 Ich wünsche mir das ihr euch bei mir wohl fühlt und freue mich auf regen Austausch mit euch seit nett zueinander und wenn dir Fragen Kritik oder Anregungen unter den Nägeln brennen scheu dich nicht mich anzuschreiben ich bin immer bemüht so zeitnah als möglich mit Rat und Tat dir zur Seite zu stehen 💚 schönen Abend und bis die Tage 👋🏻 . . . . . . . . #urbanjungle #indoorplants #sanseveria #snakeplant #happysansevieriasunday #greenhome #livingwithplants #solebich #cornersofmyhome #indoorgarden #indoorgardening #indoorgrow #indoorgreen #pflanzen #zimmerpflanzen #pflanzenmuddi #pflanzenliebe #myjungle #plantsofinstagram #plantsarefriends #plantsplantsplants #plantscout #plantstyling #plants4inspo #plantslover
Snake Plant Pruning
Pruning snake plants is not really necessary per se unless your plant is getting too big and if some parts of it are damaged.
In that case, you want to avoid spreading damage to the healthy parts of the plant, which is one of the best ways to stop most infections.
You should always use clean and sterilized tools, such as knife and perhaps sharp sheers because you want to be as precise as possible.
Snake Plant Propagation
Propagation is a process through which plants multiply. In other words, if you want to propagate your plant, you basically want to create a new one from the existing one.
There are two main types of propagation, which are called sexual and asexual.
Sexual propagation is only possible with plants that have floral parts, while asexual propagation is more common with plants without floral parts.
Now when it comes to the snake plant propagation, there are several ways you can do it, depending on your choice and conditions you have.
I’ll explain all three in detail, so you would know how to propagate the snake plant properly, no matter the method you choose, so stay with me if you want to know more.
1. Rooting in Water
Knowing how to grow a snake plant in water will help you to do it as efficiently as possible, without having to worry about little details.
Therefore, let me walk you through the entire process and help you grow a snake plant in water like a real pro.
The first thing you want to do is find a proper pot, container or something similar that will be used to store the leaf.
It really doesn’t matter what you will use, as long as it is big and tall enough to hold the leaves of your snake plant.
Also, if you are using pot, try not to use pots with little holes, since you need water to stay in the pot after all.
Once you’ve selected the proper container for your plant, you will need to find a leaf that is healthy enough to be used for propagation.
Make sure it is not too old as well because older leaves might not prove to be as good for propagating as younger and stronger ones.
To remove it from the existing plant, use clean tools, preferably shears that are sharp enough to cut it as precisely as possible.
Now when that is done, make sure to put the bottom part of the leaf you just cut in the water but make sure that only one-quarter of the tissue is in water.
After you do that, make sure to place the pot or container in a light area, which is preferably not exposed directly to the sunlight.
Don’t forget to change the water at least two times per week and soon you will notice that there are little roots.
Once you notice those roots, you can take the leaf and plant it in a pot, after which you should just take care of it as you would of usual snake plant.
View this post on Instagram
Beautiful snake plants 😍🌿 -Dracaena trifasciata is a species of flowering plant in the family Asparagaceae, native to tropical West Africa from Nigeria east to the Congo. It is most commonly known as the snake plant, Saint George's sword, mother-in-law's tongue, and viper's bowstring hemp, among other names. -Allow soil to dry between waterings and take extra special care not to over water in winter. Try to avoid getting leaves wet when you water. Place your snake plants in indirect light (although they are tolerant of a variety of light conditions) and fertilize during the growing season with an all-purpose plant food. – Benefits of Sansevieria/Snake Plants: The Snake Plant cleans air better than most other indoor plants as it has the ability to absorb excessive amounts of carbon monoxide. Additionally, it emits oxygen and filters other toxins from the air such as benzene, xylene, trichloroethylene and formaldehyde. -The secret to propagating Sansevieria, or, Snake Plants from leaf cuttings is by rooting them in water! Take leaf cutting in segments of around 4-6 inches long, let them heal for a few days before setting them in water. It may take a few months for roots to form, so keep an eye on the water level. #snakeplant #snakeplants #houseplants #plants #plant #nature #plantbased #plantlovers #plantlife #plantaddict #plantaddiction #urbangarden #plantlover #plantsofinstagram #plantloversofinstagram #plantinstagram #indoorjungle #indoorplants #indoorgarden #beautifulplants #helpfulplants
2. Propagating with Cuttings
Quite similarly to the previous method, you can also grow a snake plant from cutting. The entire process is almost the same as the one with the water, with a slight change.
What you should do is simply let the cut leaf callus to stay like that for a couple of days, then just find some moisty sand, put it in a container and insert the end part of the cut leaf in the sand.
Leave it like that for a week or two and roots should eventually appear. However, make sure that sand isn’t too moist or too dry. Otherwise, the plant might not be able to grow healthy and strong roots.
3. Propagating from Division
Now that you know how to grow a snake plant from cutting, and whether propagating snake plant in waterworks, let’s move on to the last method for propagating snake plant, which is, of course, the division.
Before you move onto the process itself, you should know that the snake plant can also grow from organs named rhizomes, which are located under the soil.
So, how does it work?
Rhizomes are used to store the energy needed to grow the most important parts of the plant, such as leaves and stem.
Now, to be as efficient as possible when trying to do this, you should use proper tools, such as shears that are pretty sharp, or even try using a hand saw.
Take the plant out of the pot and cut the base point into several different sections. Most of the time, you will need to cut it in half if your snake plant isn’t old.
The proper balance is that you should have a minimum of three rhizomes, as well as at least one leaf that is healthy enough.
After you are sure everything is right, you can simply get another pot and plant the cut section as a completely new plant.
Repotting Snake Plant
The most important snake plant benefit is that it will make your home or office more beautiful if you treat it the right way.
It is common for all plants to grow, and when they do, they usually need to be repotted. When it comes to repotting a snake plant, there are several important things to think about, such as knowing when is the right moment to report it, how to repot a snake plant and how to take care of it after it has been repotted.
Picking the Right Time to Repot Snake Plant
As for the season, it would be the best to repot snake plant during the last days of winter, or the first days of spring.
During that period, a snake plant usually doesn’t actively grow, so by repotting, you wouldn’t potentially harm completely active and healthy specimens.
However, a repotting snake plant can be performed at any time if the need arises. It is quite easy to recognize the signs.
What you should look for is the bottom of your pot and check if roots are coming through the holes used for drainage.
If that is the case, it means that the current pot is too small for roots to efficiently grow, so you should find a larger pot.
Also, if you use a plastic pot, you might notice that it is becoming bulky, which is another sign that the plant should be repotted.
Snake plants per se usually prefer to be root bound, but when they get too big for their current pots, they should be transplanted into a bigger one, or they might die.
Another solution is to propagate it if you want to grow more plants in order to beautify other areas of your home.
How to Repot Snake Plant
The first logical step in this process is to find a proper pot for your snake plant. Keep in mind that a snake plant can have quite large leaves, so the top part of the plant can be pretty heavy.
To avoid falling over and keeping the balance, you should get a wider pot, rather than just focusing on getting a deeper one.
The best measurement is to take a pot that is around 2” wider than the previous one because you don’t want to get the too large pot.
If you get an oversized pot, that means that there will be more soil than needed, which could hold moisture for more time, and that could cause rotting of the root, which is not good for your snake plant.
Apart from that, you should think about using the best soil for indoor plants and focus on getting the one that has pretty good draining capabilities.
The most common type of soil for the snake plant can be found on our list of 5 best soil for snake plant, and it would be a good idea to mix it with a small amount of sand, to increase the drainage ability.
Also, you can add a bit of compost, but make sure that you don’t overstep and add too much because it is known that compost can hold quite a bit of moisture.
Now, for the transplanting. When removing the snake plant from the previous container or pot, make sure to be careful, in order not to hurt the root.
If you notice certain dark spots in the root area, that means that rot is developing there, so you should clean it first, by cutting the infected areas with the sterile tools.
After that is done, put your plant in a new pot, and make sure not to elevate it too much, since the depth should be the same as before.
Tap the soil until your plant is well-supported and water it. If you notice that watering causes the soil to sink, you should insert more soil, in order for it to stay at the right elevation.
View this post on Instagram
My dotty plant family has grown AND there are more on the way! 🖤🌱 . . . . . . #plantpot #pot #succulents #snakeplant #ceramicsofinstagram #claystagram #claylife #plants #plantsofinstagram #plantsmakepeoplehappy #clay #pottersofinstagram #pottery #ceramics #handmade #handpainted #thrown #dots
How to Care about Snake Plant after Repotting
You can think of a repotting as a type of surgery. And just like humans need time to recover from the surgery, plants also need some time to recover from the repotting, especially if you had to remove certain unhealthy parts during the process.
After repotting, you should keep your snake plant in bright areas, but not on the direct sunlight. That is one of the reasons I told you that the best time for repotting is near the end of the winter or at the beginning of the spring because at that time, temperatures are quite normal and the sunlight is not too expressed.
Also, it would be best not to use fertilizers for the first month after repotting a snake plant because it allows the plant’s root to take hold and get familiar with the new personal space.
Watering is also quite important after repotting, so make sure not to water the plant if the first inch of the soil from the top is not completely dry.
Snake Plant Problems and Solutions
Even plants that are easiest to take care of can run onto some sort of problems, which you will need to address, in order for the plant to continue to grow as it should.
The snake plant is no different in that regard. Therefore, I want to talk about the most common problems you can stumble upon when caring about a snake plant and how you can resolve them.
1. Rotting Root
One of the most common problems when caring for a snake plant is the issue of a rotting root, which can be caused mostly by too much watering.
This problem occurs mostly during the winter and colder weather, so this is when you need to be really careful about watering your snake plant.
Roots die because they lack oxygen, or because there is too much fungus in the soil. If the soil is too moisty, different fungi can spread inside the root and make the plant sick.
After that, roots usually get a brown color and become weak, thus withering quite fast because they are not able to get enough healthy nutrients.
What makes this issue even bigger is the fact that it is really hard to notice it, since all of it happens under the soil, where you can’t see it, unless you take out the plant completely.
To help with this problem, you might want to think about getting a pot with a good draining system, which should make your life much easier.
The most noticeable sign of rotting root is when root changes its color to brown and become really mushy. After that comes the effect on other parts of the plant, such as leaves, which can become brown and yellow, as well as crunchy, looking dead-like.
However, if you notice this on the leaves, then it might already be too late to rectify it, which can put the whole plant in danger.
If you manage to notice the symptoms early on, then the best solution is to completely repot the plant and remove harmful soil.
Instead, you can add clean soil, as well as use some treatment for root, most of which contain useful mycorrhizae.
Along with that, you could add sulfur powder, which can help your plant to stop the infection from returning again.
However, if you notice that the damage to the root is too high, then you will need to dissect the entire plant and keep only parts of it that are completely healthy, so you could propagate it and grow a new plant.
The best way to prevent rotting roots from even happening is to take greater care when watering a snake plant.
You should only water it when the top of the soil, let’s say first 4” is completely dry. To help you with that, you should definitely get a soil meter.
During the winter, this means that you will probably need to water your plant only once a month, perhaps even once in two months.
2. Cold Temperatures
Snake plant originates from Africa, more precisely, West Africa, so you could say that it likes a hot climate, and it can’t quite sustain cold weather if it is outside of the house.
Cold weather can damage the snake plant’s leaves by creating a barrier that prevents the normal flow of healthy nutrients, which can lead to plant dying because there wasn’t enough moisture.
There are several quite noticeable signs on the snake plant that could point out damage received from the cold temperatures.
The most common ones are those on the leaves, such as quite a noticeable scarring, leaves turning yellow, and becoming squashy.
The best way to deal with the damage caused by cold temperature is to prune parts that were damaged, in order to keep them away from other healthy parts.
Dead parts can easily spread to the ones that are healthy, which can eventually lead to the early demise of your plant, so always try to avoid that, by removing damaged and dead plant parts.
To prevent that from happening, you can select a proper location for your plant, and get your snake plant indoor, where it will be able to thrive without issues, both during the warm and cold days.
The best temperature conditions for a snake plant are in locations where the temperature during the day is somewhere around 15 to 26 degrees Celsius, and from 12 to 21 degrees Celsius during the night.
3. Issue with Mealybugs
Mealybugs are quite annoying little insects that have pretty soft bodies, and kind of look like small cotton particles.
That type of body makes them resistant to heat and capable of keeping the moist inside their bodies. They can usually be seen around the surface of the soil, as well as on the leaves from time to time.
The most commonly known type of these insects is the citrus mealybug. They usually just lay a lot of miniature eggs and then die in around a week.
So, how mealybugs can hurt your snake plant and how will you be able to notice it?
There will be few quite noticeable symptoms. For example, leaves will grow in unnatural, somewhat deformed way.
Apart from that, mealybugs tend to use snake plant’s fluid as food, so when they feed, they can leave a trace of honeydew, which contains a lot of sugar and it is quite sticky.
The problem with this is that honeydew can instigate the growth of another harmful thing, which is sooty mold, which can cause additional problems and, if not treated on time, can lead to the demise of your snake plant.
By now you might be wondering how to deal with these little annoyances, am I right?
Luckily, the treatment is pretty easy, especially if you notice the problem on time. You simply need to wipe your snake plant parts where mealybugs are with clothes and alcohol.
However, before you do that, make sure that your plant is strong enough for that, since you don’t want to accidentally kill your snake plant.
The only thing you could do to prevent mealybugs from infecting your plant is to regularly check if they have appeared.
If you have some other plants nearby, make sure to check them as well, since mealybugs like to go from one plant to another, thus damaging all of them.
If you notice them on some of your plants, make sure to put that plant in the isolation, so mealybugs aren’t able to infect other plants.
4. Spider Mites Problems
Another pretty common pests that could invade and completely damage your plants are, of course, spider mites.
They are very small and can usually be seen on the bottom side of plant’s leaves, where they stay and feed on pretty tasty fluids, which can be found there.
Spider mites can be quite hard to notice, since they can invade your plant, without showing any symptoms at first.
One of the most common symptoms your snake plant can show is the yellow color of leaves, which may or may not be proven to be caused by spider mites.
Apart from that, you can notice that there are some sort of webbings in areas close to leaves and at the bottom base of the snake plant, which look like spider made them.
A quite simple solution to this problem is to apply insecticidal soap on your plant or try using water at first, after which you should find some soft and quite clean cloth, and really carefully go across the leaf area.
If you feel like your plant is strong and stable enough, you can also simply turn the pot upside down and try to use shower or kitchen sink to try to remove these pests.
However, if you are too late and there is quite serious infestation of spider mites on your snake plant, you might need to remove the infected areas, so the infections couldn’t spread on healthy parts of your plant.
One thing you should know about spider mites is that they like dry places, so always try to keep high enough humidity in the environment where you snake plant is.
Also, dust your snake plant from time to time, thus not leaving enough space for spider mites to take hold of and give them time to lay their potential harmful eggs.
View this post on Instagram
E a planta do apê de hoje é uma das que fica no meu banheiro, a famosa Espada de Santa Bárbara! A minha é uma “Sansevieria trifasciata Laurentii”, pois conta com essa borda amarelada bem característica, que dá um charme a mais às suas folhagens. É uma boa planta para se ter em banheiros pois é super resistente, purifica o ar e demanda poucos cuidados em relação à adubação (uma vez ao ano é suficiente) e à rega. É bom esperar o solo ficar sequinho (não extremamente seco!) para regar novamente. Sempre confiram colocando o dedo de 4 a 5cm na terra para checar a umidade e aí pode regar bem até a água começar a escorrer do vaso. Como ela fica no banheiro, geralmente faço isso em cima da pia e espero parar de pingar para colocar de volta no pratinho. Uma outra coisa que faço é que, como meu banheiro não tem janela, sempre que me lembro a coloco para pegar umas horinhas de sol e, no fim do dia, a devolvo para o seu lugar! 🐶Atenção: É uma planta tóxica para cachorros, então se você tem um, mantenha a planta fora do alcance dele ou acompanhe para ver se ele tem interesse em mastigar a planta. Muitas vezes os cachorros não gostam das plantas tóxicas, mas de qualquer forma é bom não deixá-los sozinhos com acesso às mesmas! . . . #plants #plantas #urbanjungle #plantandonoape #monstera #costeladeadao #tropical #maranta #alocasia #heliconia #tropicalplants #greenismyfavoritecolor #crazyplantlady #loucadasplantas #plantasnoape #florestaurbana #monsteradeliciosa #snakeplant #espadadesaojorge #lancadesaojorge #plantanobanheiro
5. Southern Blight
The cause of Southern blight is one pretty nasty parasitic fungus that is usually called Sclerotium rolfsii, which can invade a lot of types of both indoor and outdoor plants.
Estimates show that this fungus can attack more than 500 species of different types of plants, and in most cases, it has quite deadly effect on most plants, especially if we are talking about plants that are grown in hot climates with a high humidity and quite moisty conditions.
Southern blight directly attacks the stem, and can have extremely negative effects in short amount of time, usually from 7 to 10 days, after which there are certain signs that could signify that your plant has some issues.
The most usual symptom of Southern blight is the appearance of white markers on the snake plant’s leaves, which have a tendency to change to dark brown later on.
Also, plant tissue may become quite weak and too soft, thus becoming less durable, which is an indicator that infection is really taking place.
As for the treatment, you basically have two options. You can simply prune infected parts, thus keeping the healthy parts of the plant alive, which is the recommended solution for most plants.
Another solution is to use some sort of chemical substance, such as different types of fungicide, in order to fight the infection.
However, it is known that chemical treatments can also have some negative effects on all kinds of plants, so you should only use them as your last measure.
To prevent Southern blight from happening, make sure to regularly check the health of your snake plant, by looking at the possible signs of fungal infection.
Also, never use the soil from pots where previously infected plants were residing, since it might be contaminated as well.
6. Red Leaves
Sometimes, you might notice a red spot on leaves of your snake plant. It is one of the most common fungal diseases that attack snake plants.
The most common cause of this problem is Drechslera erythrospila, and it usually attack plants during warm temperatures, mostly during the spring and summer, but it can also appear throughout the year as well.
It is quite easy to recognize this disease, since your leaves will have tiny red spots, which can spread throughout the longer period of time, which results in the appearance of big lesions that are quite sunken, and liquid-like.
The easiest and the most efficient thing you could do to fight red leaf spot is to prune the leaves that are affected by it.
That way, you will reduce the chance of spreading the infection to parts of your snake plant that are still healthy.
However, if the infestation is not quite severe, you could also try to use a sulfur spray, or different type of fungicide, such as for example the one that contains copper.
Applying chemical solutions cannot cure your snake plant from the ongoing infestation, but it can completely stop it from spreading.
This problem can occur if there is a standing water residing on the surface of the leaf area, so you should always try to ensure that there is the optimal airflow in the environment surrounding your snake plant.
Apart from that, you should regularly check the plant for potential infections and pests, as well as keeping it clean and healthy.
1. My snake plant won’t grow! Why is that?
There are several reasons why your snake plant might not be growing as fast as you expect it. Depending on the season, it can grow slower or faster.
During the winter or cooler fall days, snake plant will grow at a much slower rate than usual, and even completely stop growing for some time because it needs to save some energy to survive cold weather.
However, if the growth is decelerated during the warm days, then you should check if plant has some problems.
Apart from that, snake plant light is quite important because if it is not good enough, snake plant will grow at a slower pace, so make sure to know how much light snake plant needs.
It is not demanding too much in that regard, just like a spider plant, but still, if you want it to grow faster and be healthy, inform yourself.
View this post on Instagram
#happysansevieriasunday meine Lieben 💚 Wünsche dir einen schönen Abend und morgen einen guten Start in die neue Woche . #happysansevieriasunday my friends💚 Have a nice evening and have a good start tomorrow for the new week . . . . . . . . #plantdecor #houseplantaddict #indoorgreen #livingwithplants #indoorgrow #plantgang #indoorgarden #indoorgardening #urbanjungle #myjungle #plantsarefriends #solebich #wohnkonfetti #cornersofmyhome #cozyliving #pflanzenliebe #pflanzen #sansevieria #snakeplant #greenlover #houseplantfactory #greenisgood #houseplantsofig #plantsofinstagram
2. Can snake plant hurt my pets or children?
Most parts of snake plant are tiny bit toxic, which means that in large amounts, it could cause some unpleasant symptoms, such as skin swelling and numb tongue if you eat it.
Because of that, it is recommended that you keep your pets and children away from the snake plant, so there aren’t any problems.
Therefore, as a simple answer, snake plant and dogs, and snake plant and cats don’t go well together, even though consumption in small doses is pretty much harmless.
I think my snake plant is in a good form, but some leaves keep falling. What could be the problem?
If that is the case, then the most probable reason for falling leaves is that your plant suffers from overwatering.
In order to keep your plant healthy and beautiful, you should wait until it is completely dry between watering sessions.
Also, plants grow older over time, so it might be normal for some parts to wither, so just make sure to remove them, once you notice it, so they don’t cause harm to other healthy parts.
3. Does snake plant have flowers?
Yes, under the proper conditions, snake plant can get flowers.
4. Why are leaves on my snake plant leaning over the pot?
That’s usually one of the most common signs that you need to repot your snake plant. To maximize the growth, don’t forget to bury the plant a bit lower in the next pot.
Also, if you don’t like the sight of bent leaves, you can always cut them off since that will not hurt your snake plant at all.
5. There are white dries patches on a couple of leaves of my snake plant. What could that be?
Most common problem associated with this symptom is some sort of fungal infection. To prevent this, you should know how often to water snake plant, since the plant is classified as the drought tolerant plant, which means that it doesn’t like to be wet all the time.
To fix the issue at hand, you can simply add peroxide in the water, so the ratio would be 3/4 water and 1/4 peroxide, which should be enough to remove the infection from your plant.
6. Shall I use big pot, so I wouldn’t have to repot my plant multiple times?
Repotting snake plant is easy enough, but you should keep several things in mind. Most importantly, don’t use big pot right away because it would take much longer time for soil to dry out, which could hurt your plant, since snake plant doesn’t like being moisty too much.
Therefore, it is better to use smaller pots, and then when the plant is ready for repotting, you can simply take a slightly bigger pot and put it in there.
And there you have it, my dears!
If you ever wanted to have a beautiful snake plant in your indoor garden but you were just unsure how to take care of it or if it requires a lot of time, now you know.
If you do have more questions on snake plants, be sure to write to me and your Sara will help you grow that indoor paradise!Follow us on: